Battery not charging or not reaching full charge

Sourced from the official MuscleGrid manuals · updated 2026-08-13

If the battery is not charging:

  1. Confirm mains/grid input is present and within range (about 180-260V).
  2. Check that the correct battery type is selected in inverter settings (Lithium/LiFePO4 for MuscleGrid batteries).
  3. Check charging current setting is not set too low.
  4. On solar, ensure panels are getting sunlight and PV is connected. If mains is fine but it still won't charge, the charger section may need service.

Related guides

⚡
Inverter fault codes→
Look up any error code by series
🔋
Battery fault codes→
JK BMS codes on the battery LCD
🛠
All troubleshooting guides→
Step-by-step fixes for common problems
Still stuck? Our support team fixes these issues every day — most by remote guidance, the rest by free doorstep pickup-repair-return under warranty.
Contact MuscleGrid Support →  ·  Register your warranty